Plywood / OSB – R Value Nail Base / Retrofit Roof Panel

This panel is available with a plywood or OSB skin. The other side of the panel is exposed EPS Foam. This panel is ideal for new or existing low slope or flat roof applications where sufficient attic space is not available for conventional insulation. The Innova SIP Retrofit roof panel is attached by screwing through the existing roof sheathing into the existing roof trusses with appropriate SIP fasteners. This panel is also available with Neopor® for added insulation value. The Innova SIP R Value Retrofit panel is an easy way to upgrade the energy efficiency of any new or existing roof system.

Drawing depicting Innova Nail Base SIP roof panel attachment to existing gable roof truss system

Plywood and OSB Nail base insulated panels

Nail base insulated panels not only insulate the structure, but provide valuable air sealing of the existing structure which leads to increased energy efficiency, better indoor environmental control and air quality. Architects, Designers and building Owners can specify the thickness and density of EPS insulation needed to achieve and / or exceed the applicable energy codes. Increase the R-value approximately 20% more with Neopor® for the same thickness of panel. Nail base insulated panels can be attached to existing or new concrete decks or directly to the existing roof trusses. Attachment is made with appropriate fasteners without removing existing sheathing, saving additional time and money.

Contact Innova today to find out how to use our energy efficient nail base SIP products on your next project.

There is an Easier Way to Build, it’s the Innova Way™